top of page
Peg 01.jpg


A new type of concrete slab

Anchor 1

Insta-Slab is used as a base for water tanks, oil tanks, or any other containment structures for liquids and bulk materials. These concrete slabs are also perfect for sheds and greenhouses.

Insta-Slab streamlines the process of building a concrete slab for small to medium projects using a revolutionary material, made in Wales, called Concrete Canvas with a lifespan of 120 years.

How does it work?

How does it work?

How does it work?

Before a storage tank or containment unit is installed, the laying of a concrete slab, or reinforced concrete slab, is recommended for structural durability, safety and strength. When employing conventional concrete solutions, this process can become time-consuming, troublesome, and expensive. Contractors tend to be busy and not keen on small projects. Consequently, the costs are high due to the amount of labour and materials involved so they tend to avoid them!

Deploy can handle this part of the installation (be it a new or refurbishment project) simply with the new Deploy Insta-Slab solution which is designed to streamline and speed up the work by reducing timescales, installation difficulties, and construction costs.

Set it up!


Step 1


Material Light Blue.png

Step 2

Lay & Fix


Step 3


Make sure that the substrate is properly leveled out and has a 3-5 cm sand bed before laying the Easy-Slab.

Unfold the material to cover the area required. Then secure the concrete fabric by fixing the material to the substrate.

Make sure the surface is irrigated evenly, with 3.5 litres of water per square metre.  

Pegging options.

When fixing to a soil substrate, an anchor trench or ground pegs are typically used. Conversely, on rock or concrete substrates, the layers can be jointed together and fixed to the substrate using masonry bolts or percussion anchors. Stainless steel fixings with washers are recommended.

Peg 04.jpg

J-Type Peg

Peg 02.jpg

Rounded Headed Peg

Peg 03.jpg


Peg 01.jpg

Metal Edge Strips

Available sizes.

Insta-Slab is available in 5 different sizes.

Units are in millimetres (mm).

1. 2000 x 2000 mm (smallest size).

2. 3000 x 3000 mm.

3. 4000 x 4000 mm.

4. 5000 x 5000 mm.

5. 6000 x 6000 mm (largest size). 

Easy-Slab Dimensions.png
bottom of page